MOF134OB_MOLKOB
OASIS LIGHT KIT / AC / 130CM
Oasis te brindará un estilo tropical a tus estancias. El kit de iluminación está equipado con 2 portalámparas E27 rodeados por un resistente difusor de cristal esmerilado.
99.00 €
| Negro
+
1
-
Ahorro de energia
Reversible verano/invierno
Anclaje seguro
Zonas costeras
Exteriores cubiertos
Motor AC
Características
keyboard_arrow_up- Cuerpo de metal y palas de ABS de diseño aerodinámico.
- No se oxida y es anticorrosivo, lo que lo hace adecuado para uso en interiores / exteriores cubiertos
- Función verano/invierno
- Motor AC con rodamiento de bolas de larga duración
- La última tecnología y diseño de ventiladores de techo
- Anclaje seguro para techos inclinados
- Aspas resistentes a los rayos UV para una mayor longevidad.
Dimensiones
Incluye
nada
Instalación
Debe ser instalado por un profesional
Envío
Especificaciones
keyboard_arrow_up| NOMBRE | OASIS |
| REFERENCIA | MOF134OB_MOLKOB |
| POTENCIA | 64w | 29w| 15w |
| VELOCIDADES | 3 |
| Motor | DC |
| MATERIAL | Cuerpo de aluminio y aspas de ABS |
| CAUDAL DE AIRE | 9.900m3/hr |
| CONTROLADOR | Mando a distancia |
| CONEXIÓN FÁCIL | Sí |
| MEDIDAS | 1320mm |
| NÚMERO DE ASPAS | 4 |
| REVERSIBLE VERANO/INVIERNO | Sí |
| ANCLAJE SEGURO | Sí |
| Ubicación | Interiores y exteriores cubiertos |
| Voltaje | 220-240V~AC |
| Frecuencia | 50Hz |
| Garantía | 10 años |
| Iluminación | 2xE27 |
| Lúmenes | - |
| Temperatura | 3000K / 4000K / 5000K |
| Regulable | Sí |
| CRI | ≥80 |
| Ángulo de apertura | - |
| Tipo de Led | 2xE27 |
| Resistencia | - |
| IC-4 | - |
| Vida útil | - |
| SENSOR DE MOVIMIENTO | - |
How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.
Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.
Cambios y devoluciones gratis
Envíos 24/48H.
Envíos gratis a partir de 49,90€