MMDC1333WW
MALLORCA LED BLANCO MATE/ BLANCO /DC / 132CM / (WIFI)
La gama Mallorca DC de 1320mm ofrece un acabado de alta calidad. Cuenta con un eficiente y silencioso motor DC de 8 velocidades (4w | 7w | 12w| 18w | 24w| 32w) regulables a través del mando a distancia. Ofrece una luminaria LED SMD de 20W con temperatura seleccionable (2700k, 3000k, 4000k, 5000k, 6000k) y luz dimmable.
0.00 €
| Blanco
+
1
-
Ahorro de energia
Reversible verano/invierno
Anclaje seguro
Exteriores cubiertos
Motor DC
Silencioso
Dimmable
Características
keyboard_arrow_up- Muy silencioso, ideal para dormitorios
- La última tecnología y diseño de ventiladores de techo
- Anclaje seguro para techos inclinados
- Motor DC de bajo consumo
- Totalmente reversible para uso en verano e invierno.
- La conexión rápida permite que nuestros controles remotos se instalen fácilmente en minutos.
- Dimmable
Dimensiones
Incluye
Mando a distancia
Instalación
Debe ser instalado por un profesional
Envío
Especificaciones
keyboard_arrow_upNOMBRE | MALLORCA LED BLANCO MATE/ BLANCO /DC / 132CM / (WIFI) |
REFERENCIA | MMDC1333WW |
POTENCIA | 4w | 7w | 12w| 18w | 24w| 32w |
VELOCIDADES | 8 |
Motor | DC |
MATERIAL | Cuerpo y aspas de ABS |
CAUDAL DE AIRE | 10,200m³/hr |
CONTROLADOR | Mando a Distancia + WIFI (Tuya) |
CONEXIÓN FÁCIL | Sí |
MEDIDAS | 1320mm (52”) |
NÚMERO DE ASPAS | 3 |
REVERSIBLE VERANO/INVIERNO | Sí |
ANCLAJE SEGURO | Sí |
Ubicación | Interiores y exteriores cubiertos |
Voltaje | 220-240Va.c. |
Frecuencia | 50-60Hz |
Garantía | 20 años (solo motor) |
Iluminación | 20W LED |
Lúmenes | Hasta 2120lm |
Temperatura | 2700K / 3000K / 4000K / 5000K / 6000K |
Regulable | 1-10 |
CRI | 85-90 |
Tipo de Led | 20W LED |
Vida útil | 35,000 hrs @ Ta25°C |
How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.
Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.
Cambios y devoluciones gratis
Envíos 24/48H.
Envíos gratis a partir de 49,90€