B132CA
CABRERA / DC / 132CM
Cabrera DC es un ventilador de techo DC de 132 cm. Garantiza 6 velocidades con un funcionamiento totalmente silencioso. De diseño moderno, cuenta con un cuerpo de acero y aspas de madera natural. (35,6w | 23w | 16w | 8w | 9,5w| 7,5 w | 5,6 w).
0.00 €
| Blanco
+
1
-
Reversible verano/invierno
Anclaje seguro
Exteriores cubiertos
Motor DC
35W DC
Silencioso
Características
keyboard_arrow_up- Muy silencioso, ideal para dormitorios
- Función verano/invierno
- La última tecnología y diseño de ventiladores de techo
- Anclaje seguro para techos inclinados
- Motor DC de bajo consumo
- Potente y eficiente motor de DC de 35 W
- Control remoto de 6 velocidades incluido
- La conexión rápida permite que nuestros controles remotos se instalen fácilmente en minutos.
Dimensiones
Incluye
Mando a distancia
Instalación
Deber ser instalado por un professional
Envío
Especificaciones
keyboard_arrow_up| NOMBRE | CABRERA |
| REFERENCIA | B132CA |
| POTENCIA | 35,6w | 23w | 16w | 8w | 9,5w| 7,5 w | 5,6 w |
| VELOCIDADES | 6 |
| Motor | DC |
| MATERIAL | Cuerpo de aluminio / Aspas de madera natural |
| CAUDAL DE AIRE | 12.200m³/hr |
| CONTROLADOR | Mando a distancia |
| CONEXIÓN FÁCIL | Sí |
| MEDIDAS | 132cm |
| NÚMERO DE ASPAS | 3 |
| REVERSIBLE VERANO/INVIERNO | Sí |
| ANCLAJE SEGURO | Sí |
| Ubicación | Interiores y exteriores cubiertos |
| Voltaje | 220-240V~AC |
| Frecuencia | 50Hz |
| Garantía | 10 años |
How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz. The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops. People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.
Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.
Cambios y devoluciones gratis
Envíos 24/48H.
Envíos gratis a partir de 49,90€